Advanced Piezoelectric Materials: Science and TechnologyKenji Uchino Elsevier, 27.09.2010 - 696 Seiten Piezoelectric materials produce electric charges on their surfaces as a consequence of applying mechanical stress. They are used in the fabrication of a growing range of devices such as transducers (used, for example, in ultrasound scanning), actuators (deployed in such areas as vibration suppression in optical and microelectronic engineering), pressure sensor devices (such as gyroscopes) and increasingly as a way of producing energy. Their versatility has led to a wealth of research to broaden the range of piezoelectric materials and their potential uses. Advanced piezoelectric materials: science and technology provides a comprehensive review of these new materials, their properties, methods of manufacture and applications. After an introductory overview of the development of piezoelectric materials, Part one reviews the various types of piezoelectric material, ranging from lead zirconate titanate (PZT) piezo-ceramics, relaxor ferroelectric ceramics, lead-free piezo-ceramics, quartz-based piezoelectric materials, the use of lithium niobate and lithium in piezoelectrics, single crystal piezoelectric materials, electroactive polymers (EAP) and piezoelectric composite materials. Part two discusses how to design and fabricate piezo-materials with chapters on piezo-ceramics, single crystal preparation techniques, thin film technologies, aerosol techniques and manufacturing technologies for piezoelectric transducers. The final part of the book looks at applications such as high-power piezoelectric materials and actuators as well as the performance of piezoelectric materials under stress. With its distinguished editor and international team of expert contributors Advanced piezoelectric materials: science and technology is a standard reference for all those researching piezoelectric materials and using them to develop new devices in such areas as microelectronics, optical, sound, structural and biomedical engineering.
|
Im Buch
Ergebnisse 1-5 von 61
Seite 6
... tetragonal to rhombohedral) around room temperature or operating temperature, and (2) aging effect due to the low curie temperature (phase transition from cubic to tetragonal) around only 120°c. in order to increase the curie ...
... tetragonal to rhombohedral) around room temperature or operating temperature, and (2) aging effect due to the low curie temperature (phase transition from cubic to tetragonal) around only 120°c. in order to increase the curie ...
Seite 7
... tetragonal and rhombodedral phases, and found enormous electromechanical coupling around that composition range.16 his patent had a significant effect on the future development strategies of Japanese electroceramic industries. it is ...
... tetragonal and rhombodedral phases, and found enormous electromechanical coupling around that composition range.16 his patent had a significant effect on the future development strategies of Japanese electroceramic industries. it is ...
Seite 11
... tetragonal phases in Fig. 1.6, in comparison with Fig. 1.4.24 Figure 1.7 shows changes of electromechanical coupling factors with mole fraction of PT in the Pb(Zn1/3nb2/3)o3–PbTio3 solid solution system, reported by J. Kuwata, K. Uchino ...
... tetragonal phases in Fig. 1.6, in comparison with Fig. 1.4.24 Figure 1.7 shows changes of electromechanical coupling factors with mole fraction of PT in the Pb(Zn1/3nb2/3)o3–PbTio3 solid solution system, reported by J. Kuwata, K. Uchino ...
Seite 35
... (tetragonal phase), below 5 ∞c it reorients in the [011] (orthorhombic phase) and below –90 ∞c in the [111] direction (rhombohedral phase). The dielectric and piezoelectric properties of ferroelectric ceramic BaTio3 can be affected by ...
... (tetragonal phase), below 5 ∞c it reorients in the [011] (orthorhombic phase) and below –90 ∞c in the [111] direction (rhombohedral phase). The dielectric and piezoelectric properties of ferroelectric ceramic BaTio3 can be affected by ...
Seite 38
... tetragonal structure at room temperature with its tetragonality c/a = 1.063. The curie temperature is 490°c. Densely sintered PbTio3 ceramics cannot be obtained easily, because they break up into a powder when cooled through the curie ...
... tetragonal structure at room temperature with its tetragonality c/a = 1.063. The curie temperature is 490°c. Densely sintered PbTio3 ceramics cannot be obtained easily, because they break up into a powder when cooled through the curie ...
Inhalt
1 | |
87 | |
Part II Preparation methods and applications | 347 |
Part III Application oriented materials development | 559 |
Index | 660 |
Andere Ausgaben - Alle anzeigen
Advanced Piezoelectric Materials: Science and Technology Kenji Uchino Keine Leseprobe verfügbar - 2016 |
Advanced Piezoelectric Materials: Science and Technology Kenji Uchino Keine Leseprobe verfügbar - 2010 |
Häufige Begriffe und Wortgruppen
acoustic actuators Appl applications bulk ceramics characteristics charge coefficient composition constant coupling dependence deposition developed devices dielectric direction displacement domain drive effect elastic electric field electrode electromechanical energy exhibit fabrication factor ferroelectric Figure flux force frequency function grain growth heat higher increasing ions layer lead LiNbO3 loss materials maximum measured mechanical method mode multilayer observed obtained optical orientation particle performance period perovskite phase Phys piezoelectric materials piezoelectric properties plate PMN–PT polarization poled polymer powder prepared produced range reported resonance respectively response rhombohedral sample shown in Fig shows single crystals sintering solid solution sputtered strain stress structure substrate surface Table technique temperature tetragonal thickness thin films transducer transition typical Uchino ultrasonic various vibration voltage wall wave